Not Chemical Sales
Achieve unmatched water and energy efficiency for your steam boiler with our Performance Guarantee
Save Water, Save Energy, Reduce Costs, Protect Assets
Gently Dissolve Existing Scale
HydroFLOW reduces CO2 carryover in boilers with softened feedwater, reducing neutralizing amine consumption and protecting condensate return piping from corrosion.
Operate at higher cycles of concentration, typically ranging from 8 – 16, with less blowdown.
Eliminate insulating scale deposits and restore your heat transfer surfaces to bare‐ metal pristine condition, reducing energy consumption by 10 – 20%.
Measurement & Verification
Our Total Water Management Dashboard monitors your boiler water chemistry, operating parameters, and tracks water use, enabling you to quickly diagnose and respond to leaks.
HydroFLOW For Steam Boilers
The HydroFLOW device, a non‐intrusive retrofit solution, induces a powerful 150 kHz oscillating radio frequency signal into boiler feedwater, eliminating the need for softening. Propagated throughout the boiler, the signal provides 24/7 protection against scale, tube failures and corrosion.
The HydroFLOW signal induces the dissolved minerals in the feedwater to cluster and precipitate as stable crystals that remain in suspension and do not adhere to piping and equipment surfaces as scale. The suspended particles pass harmlessly through the system until discharged as blowdown or filtered out.
Existing scale deposits are softened and re-mineralized, dissolving over time.
Protect against Corrosion
For boilers that operate with softened water, HydroFLOW technology reduces or eliminates carbon dioxide (CO₂) carryover into the condensate return system, reducing the risk of corrosion to carbon steel equipment and protecting it from premature failure and unexpected outages.
Future capital expenditures are often deferred, improving return on investment and conserving capital.
Prevent Tube Failures
HydroFLOW will prevent and control the formation of scale and deposits that cause tube failures, restrict circulation, reduce system efficiency, and compromise a boiler system’s reliability.
HydroFLOW saves hours of manual labor required to remove deposits from heat transfer surfaces of boilers and condensers.
Controls and IoT Monitoring for your Boiler
HydroTech utilizes industry leading IoT sensors and controls hardware with our own proprietary software to monitor and track water use and chemistry parameters. Our hardware packages are fully customizable depending upon the needs of your facility.
Dashboard with Alerts
Total Water Management (TWM) combines our powerful HydroFLOW electronic water conditioner with data analysis to maximize system efficiency, track and validate savings, and protect operating assets.
Automatically detect leaks and overflow and gain actionable insight into system performance and efficiency with real time data analysis and automated alerts.
Targeted Chemical Treatment
Aside from oxygen scavengers, Traditional Boiler Treatment focuses primarily on preventing scale and neutralizing carbonic acid in condensate return piping, which typically requires massive drums of boiler treatment chemicals.
HydroFLOW does the heavy lifting of controlling scale without the need for softened water, regeneration salt
We visit your locations to develop a water audit that identifies areas of potential water savings. The Water Audit includes baseline water and energy data for future comparison, along with suggested upgrades, municipal incentives and rebates that will reduce operating costs.
We install IoT meters and sensors to continuously monitor water and energy performance of the boiler. HydroFLOW electronic water conditioning is installed to prevent scale and biofilm. Measurement and. Verification (M&V) verifies water and energy conservation, while tracking cost savings.
Dashboards provide real‐time insights on performance. Alerts are generated when potential leaks or irregularities are identified. Sites are visited monthly or quarterly to review system operations, discuss cost savings and inspect digital sensors & meters. Monthly reports are generated that detail cost savings.